Brakes/Levers/Pads

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad Material: Steel - Compound: Semi-Metallic - Compatibility: Tektro IOX, Lyra, Novella Post 2010

Replacement brake hoods for Origin8 Pro Force road levers

Stainless steel outer and alloy inner w/ torx mounting bolts - Alloy inner inceases heat dissipation caused by braking - Dovetail design and spring pin connection allows true "float" and prevents brake load on pins

Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad material: steel - Compound: sintered - Compatibility: Shimano M575, M525, M515, M515LA, M495, M486, M485, M475, M466, M465, M447, M446, M445, M416, M416A, M415, M395, M375, C607, C601, C501, T6

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Oversized tire deflector - Length of Pad: 55mm - Compound: All Weather

- Cable-actuated flat-mount mechanical disc-brake caliper - "Plug and Play" dual piston caliper for improved braking performance over single-piston designs - Dual-piston brake-pad actuation prevents rotor deformation - Compatible with both 140mm and 160mm front and rear rotors - Fully adjustable design featuring pad in/out fine-tuning - Includes mounting hardware and FM adapter - Uses Origin8 disc brake pad models 120563/120564/120565

- Ergonomic lever design with integrated brake release - Aluminum/composite construction - Compatible with mechanical disc and linear pull brakes - Fits 23.8 – 24.2mm handlebars - 320g pair

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

Origin-8's Multi-Sport Bar End Levers are for caliper and cantilever brakes and can be used on touring, base and areo-extension handlebars. They're made of light and reliable forged aluminum for excellent braking power and long life. - Forged AL6061-T6 alloy construction - Compatible with caliper & cantilever brakes - Fits 19-20.5mm ID bar ends - 160g pair

Origin-8's one-stop-shop ATB V-brake Kit has all you need to stop your bike: levers, cables, housing, and brakes. For easy installation and set-up, the forged aluminum brakes feature dual spring tension adjustment while the levers sport reach adjustment.

Origin-8's Pro Pulsion Cantilever Brake provides quality stopping power on a budget for cyclocross and touring bikes. It features forged aluminum construction and a spring tension adjuster for easy set up.

Origin-8's Mini Trigger Lever is a cold forged-aluminum brake lever made for the right side of the handlebars and best suited for tight-bend BMX and riser bars. It has a short lever, a screw for adjusting the reach, an aluminum adjustment barrel, and it comes in many colors to customize your rig.

• Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) • 22.2mm (7/8") clamp • Return spring/reach adjustment • Forged aluminum construction • 2-finger lever design

• All weather compound • Fits most 50mm road caliper brakes • Available in Clear or Black models

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Avid Juicy-3,5,7,Carbon,Ultimate,BB7,Mech2002-04 / PromaxDSK950

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

Pre-bled hydraulic disc brake kit - 22mm dual piston post-mount caliper - Mineral oil compatible - Semi-metallic pads - Adjustable reach lever - Includes mounting hardware, IS adapter, spare barbed fitting & olive ferrule - Uses Origin8 disc brake pad models 120393/120281/120295 - Hose length: 1700mm hose (160mm rotor), 850mm hose (180mm rotor)

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Length of Pad: 70mm - Pad Color: Black - Hardware Color: Black - Post Orientation: Offset

- Cable-actuated post-mount mechanical disc-brake caliper - "Plug and Play" dual-piston caliper for improved braking performance over single-piston designs - Dual-piston brake-pad actuation prevents rotor deformation - Suitable for both front and rear wheel use - Available in both a Road/Cross/Gravel version, as well as a MTB-specific design - Fully adjustable design featuring pad in/out fine-tuning - Includes mounting hardware and IS adapter - Uses Origin8 disc brake-pad models 120393/120281/120295

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

- Lightweight universal 1-piece, co-molded pad design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Brand Compatibility: Universal - Length of Pad: 55mm

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Magura MT5, MT7

- Designed for caliper & cantilever brakes - Aluminum/composite construction - 23.8/24.2mm clamp - Brake release - 320g pair - SHIMANO Equivalent BL-R400

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Avid Code 2011-14, Code R

6-Bolt mounting pattern - Wide leg design improves rotor`s lateral stiffness for a consistent and firm braking surface - Stainless steel construction - Torx bolts included

Dual piston "plug and play" caliper designed to boost the performance of mechanical disc brake systems. - Cable driven mechanism actuates the caliper`s hydraulic pistons for increased brake response and power - Suitable for both front and rear wheel use - Available in both a Road/Cross/Gravel version, as well as an MTB specific design - Uses Origin8 disc brake pad models 120385/120268/120288 (each sold separately) - Tool free adjustment - Includes mounting hardware and IS adapter

Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad material: steel - Compound: sintered - Compatibility: Shimano M975, M966, M965, M800, M776, M775, M765, M665, M655M, M601, M596, M595, M585, M545, M535, R505, S500, S501, T605, T665 TRP Dash, Parabox Front

- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced carbon rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment

- Available in both short- and long-pull versions - Forged AL6061 alloy construction - 3-finger lever design with laser-etched grip pattern - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 195g pair