Shocks

The Ohlins Enduro Shock Absorber for 26/650B/29 provides the ultimate in low-hysteresis damping performance for enduro riding & racing, whether it's in straight line or side load scenario. The Shock Absorber also features a three-way external adjust for high- and low-speed compression, as well as rebound, for total fine-tuning capability. The adjustment ranges are intuitive, as well, with external adjustments for high-speed compression, low-speed compression, and rebound damping. Spring rates are also highly adjustable for all weights, effectively rounding out the shock as the complete enduro package. - It's the original gold standard for moto, and now, it's the gold standard for enduro. - Upper eyelet pin reducer hardware specific for the Enduro 26/650B/29. - Internal bladder features a motocross-inspired design, plucked ripe from the MX legends at Ohlins. - Ultra-fine spring rates ensure the perfect spring rate across all weights. This guarantees optimal performance for any setup. *Please note that springs are sold separately. - Designed for external adjustments for high- and low-speed compression, as well as rebound damping. - Compatible with Enduro 26 model year 2014. - Compatible with Enduro 650B from model years 2015 to 2016. - Compatible with Enduro 29 from model years 2013 to 2016. - Compatible with MY17 & MY18 Enduro 29 and 650B models.

The Ohlins SJ FSR Shock Absorber for 650b/29 provides the ultimate in low hysteresis damping performance for enduro riding & racing, whether it's in straight line or side load scenario, The Shock Absorber also features a three-way external adjust for high- and low-speed compression, as well as rebound, for total fine-tuning capability. The adjustment ranges are intuitive as well, with external adjustments for high-speed compression, low-speed compression, and rebound damping. Spring rates are also highly adjustable for all weights, effectively rounding out the shock as the complete enduro package. - It's the original gold standard for moto, and now, it's the gold standard for trail riding. - Upper eyelet pin reducer hardware specific for the MY16-18 SJ FSR. - Internal bladder features a motocross-inspired design, plucked ripe from the MX legends at Ohlins. - Ultra-fine spring rates ensure the perfect spring rate across all weights. This guarantees optimal performance for any setup. *Please note that springs are sold separately. - Designed for external adjustments for high- and low-speed compression, as well as rebound damping. - Compatible with Stumpjumper FSR and Rhyme FSR 650b and 29 (model year 2016-2018). - Uses specific Ohlins ultra lightweight steel springs. *Please note that springs are sold separately.

First, we took the proven damping performance of our popular Monarch series and introduced it to a new metric-sized chassis. Increased bushing overlap, a new bushing design, and a new scraper seal decreased friction and increased durability. Now we’ve changed the interior surface to improve lubrication and accelerate piston movement – further friction reductions that keep the tires firmly planted on the ground. The result is truly Deluxe. - Native metric design - Simple, effective air volume tuning system - 3-position compression adjustment (Open/Pedal/Lock) - External Rebound adjustment

Monarch Plus provides traction-gaining suppleness, giving you more control over any type of terrain – all in a lightweight bombproof package. Proven Rapid Recovery, DebonAir and Solo Air technologies come standard for this lightweight big hitter. Now with twice the rebound range, Monarch Plus allows you to take your riding to levels you never thought possible with a short and mid travel air shock. - WEIGHT: 335g - DAMPING: External rebound, 3-position compression (Open, Pedal, Lock) - CONFIGURATIONS: 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: DebonAir, High Volume Solo Air, Standard Solo Air - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OPTIONS: Also available in 195x46mm, 195x51mm, 216x57mm, 216x63mm with Specialized mount, 210x60mm with Trek mount - OTHER: *Weight based on RC3 216x63mm, standard air can, no hardware

Monarch Plus provides traction-gaining suppleness, giving you more control over any type of terrain – all in a lightweight bombproof package. Proven Rapid Recovery and DebonAir technologies come standard for this lightweight big hitter. Now with twice the rebound range, Monarch Plus allows you to take your riding to levels you never thought possible with a short and mid travel air shock. - Intended Use: Trail, Enduro - RC3 shocks feature external rebound and 3-Position compression adjustment (Open/Pedal/Lock) - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - DebonAir spring requires less force to initiate travel, offering plusher, more sensitive suspension while holding on to big-hit progressiveness - Fast Black hard anodized, forged aluminum body with sag gradients - For this rear shock, bike/frame specific mount hardware is included

Monarch Plus provides traction-gaining suppleness, giving you more control over any type of terrain – all in a lightweight bombproof package. Proven Rapid Recovery and Solo Air technologies come standard for this lightweight big hitter. Now with twice the rebound range, Monarch Plus allows you to take your riding to levels you never thought possible with a short and mid travel air shock. - Intended Use: Trail, Enduro - RC3 shocks feature external rebound and 3-Position compression adjustment (Open/Pedal/Lock) - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - SoloAir spring lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously - Fast Black hard anodized, forged aluminum body with sag gradients - For this rear shock, bike/frame specific mount hardware is included - Autosag is a simple set-up feature available only on Specialized bicycles. This feature utilizes the rider's weight to set proper shock pressure

Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 290g - DAMPING: External rebound - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet - SPRING ADJUST: Air pressure via single Schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OTHER: Weight based on 165x38mm, standard air can, no hardware

Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 215g - DAMPING: External rebound, 2 position compression (Open/Pedal) - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Solo Air - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - UPGRADE: over R: Lockout - OTHER: Weight based on 165x38mm, standard air can, no hardware

The Monarch's lightweight design not only delivers silky smooth travel, but thanks to a redesigned DebonAir spring with updated damping controls, it also delivers a spring rate you’d generally only get from a much heavier coil shock. Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. The Monarch RT3 features external rebound and 3-Position compression adjustment (Open/Pedal/Lock). - Intended Use: XC, Trail - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - DebonAir spring requires less force to initiate travel, offering plusher, more sensitive suspension while holding on to big-hit progressiveness - Fast Black hard anodized, forged aluminum body with sag gradients - 10mm 7075 aluminum shaft

The Monarch's lightweight design not only delivers silky smooth travel, but thanks to a redesigned Solo Air spring with updated damping controls, it also delivers a spring rate you’d generally only get from a much heavier coil shock. Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. The Monarch RT3 features external rebound and 3-Position compression adjustment (Open/Pedal/Lock). - Intended Use: XC, Trail - Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision - SoloAir spring lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously - Fast Black hard anodized, forged aluminum body with sag gradients - 10mm 7075 aluminum shaft - Autosag is a simple set-up feature available only on Specialized bicycles. This feature utilizes the rider's weight to set proper shock pressure

Featuring silky smooth travel in a new lightweight design, Monarch floats through bumps even better than before, turning rugged trails into tire-gripping velvet. The chassis is lean while maintaining the durability and adjustability needed to bite off huge chunks of burly trail action and epic cross country. - WEIGHT: 215g - DAMPING: External rebound, 3 position compression (Open/Pedal/Lock) - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet, DebonAir - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 10mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - UPGRADE: over RL: 3 position floodgate lever - OPTIONS: Also available in 197x48mm and 197x51mm with AutoSag and Specialized mount, 184x48mm and 197x57mm DebonAir with Trek mount - OTHER: Weight based on 165x38mm, standard air can, no hardware

Few things would piss off Newton more than the Monarch XX. Simply put, no other shock packs more energy-efficient performance in a lighter weight package – one that seemingly defies Newton’s so-called "laws" of physics. But the Monarch XX does exactly that, providing the ability to lock-out rear suspension via a single bar-mounted XLoc Sprint button. The 100% hydraulic remote lever and system is completely sealed, so unlike cable-actuated units – Monarch XX is impervious to contamination. If Newton were alive today, we doubt he'd be that stoked to go back to the drawing board with his theories. But a few miles on the Monarch XX sure would help inspire a new way of thinking, and riding. - WEIGHT: 205g - DAMPING: External rebound and XLoc Full Sprint hydraulic remote lockout with floodgate - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet - SPRING ADJUST: Air pressure via single Schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OTHER: Weight based on 165x38mm, standard air can, no hardware

The Super Deluxe Coil RCT features threshold adjustment for pedaling efficiency, compression adjustment to fine tune the ride to any trail condition and the unmistakable feel and consistent performance of a coil spring. - Native metric design - Consistent, coil-spring performance - Independently adjustable compression circuits / checked rebound - 2-position, remote-operated threshold adjustment (Open/Lock) via OneLoc remote - External Rebound damping adjustment - Sag gradients printed on the shaft and springs available in 50-pound increments - 2-position threshold adjustment (Open/Pedal) with low speed compression adjustment in Open mode *Spring sold separately

RockShox Super Deluxe rewrote the rules for rear shocks, and now it’s rewriting them again. Changes to the interior surface improve lubrication and accelerate piston movement, so tires stay planted on the ground. Refined rebound damping regulates shaft speed, enhancing rider control and increasing confidence through corners and following high-speed hits. There’s also an expanded range of rebound adjustment, near perfect steps between clicks, and a middle adjustment that’s centered between open and closed. - Native metric design - Simple, effective air volume tuning system - Independently tunable compression circuits / checked rebound - New DebonAir friction reductions match RockShox’s forks and improve traction - Refined rebound damping enhances rider control - Expanded range of external rebound damping adjustment - 3-position compression adjustment (Open/Pedal/Lock)

Tipping the scales 400 grams lighter than the Vivid Coil, the new Vivid Air is so obscenely light weight, its destined to give other downhill shocks a body image complex. But don’t let its trim waistline fool you. This is no lightweight. With an all-new air spring system, this shock was built to take on the toughest courses on the World Cup circuit, combining the consistent, supple feel of a coil shock with the adjustability, tuning, and unparalleled weight savings of an air shock. The result? A shock that sets a new standard for downhill performance. - WEIGHT: 530g - DAMPING: External beginning stroke rebound, ending stroke rebound, low speed compression - CONFIGURATIONS: 200x57mm, 216x63mm, 222x70mm, 240x76mm - SPRING: Twin Tube Solo Air - SPRING ADJUST: Air pressure via single Schrader valve - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Aluminum - BODY FINISH: Hard anodized - OPTIONS: Optional decal colors: White, Black - OTHER: *Weight based on a 216x63mm without hardware

From downhill racing to extreme freeride, the RockShox Vivid R2C combines extreme durability with the precise adjustments that matter when you're going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression. Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision. - Intended Use: Downhill - Counter Measure for zero force stroke initiation - Dual Flow Adjust absorbs big hits while staying active through small hits - Switch for on the fly toggle between full and open compression - Eye to eye length: 240mm / 9.5 inches - Stroke: 76mm / 3 inches - Eyelet Diameter: 12.7mm - Positive Spring: Coil - External Adjustments: Rebound Damping , High Speed Compression Damping , Low Speed Compression Damping * Spring sold separately

The legendary Vivid is like a “Trail Whisperer.” Even in the most impossible situations, RockShox's most rugged coil shock always knows just the right way to get it done. Any trail, any time. Nothing shakes the Vivid’s confidence. From downhill racing to extreme freeride, the Vivid combines extreme durability with the precise adjustments that matter when you’re going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression, making this shock fly through rock gardens as smoothly as it absorbs a sudden drop in altitude. - WEIGHT: 468g - DAMPING: External beginning stroke rebound, ending stroke rebound, low speed compression - CONFIGURATIONS: 200x57mm, 216x63mm, 222x70mm, 240x76mm, 267x89mm - SPRING: Steel coil - SPRING ADJUST: Preload - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Forged aluminum - BODY FINISH: Hard anodized - OTHER: *Weight based on 222x70, no coil, no hardware

To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.

To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.

To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.

To tailor rear suspension behavior to your liking, start with the spring. RockShox's Vivid/Kage Coil Spring is made of steel and includes the retainer.

Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.

Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.

Springs for Cane Creek DB Coil shocks. Available in a variety of spring rates for maximum customability.

No one knows your ride better than you. The DBAIR was built upon the Double Barrel legacy to become the first air-sprung rear shock featuring Twin Tube technology and 4-way independent adjustability combined with an unrivaled level of quality. The DBAIR enables custom, rider-tuned damping performance, optimizing every bike for every rider. Cane Creek’s all new CS is the most innovative climbing feature available. Traditional climbing modes only address half of climbing dynamics, requiring the rider’s body to respond to the rest. Double Barrel CS provides climbing-specific damping in both compression and rebound. Keeping suspension fully active while you climb results in better connection to the trail and increased efficiency without annoying pedal-bob. When you’re ready to descend, it’s all Double Barrel. After all, what goes up MUST go down… DOUBLE BARREL TWIN TUBE TECHNOLOGY Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. CLIMBING SWITCH TECHNOLOGY CS is the most innovative climbing feature available. This proprietary climbing feature (patent-pending) for Double Barrel shocks alters the entire low frequency dynamic response of the shock to specifically address the demands of ascending on a bicycle. WEIGHT - ~509 grams (weight varies by size) DAMPING - Twin-tube independent compression and rebound in two high-speed and four low-speed damping circuits ADJUSTMENTS - 4-way independent adjustment: - High speed compression - Low speed compression - High speed rebound - Low speed rebound - Air spring rate SHAFT MATERIAL - Aluminum 7075 SHAFT DIAMETER - 8mm FINISH - Anodized and laser-etched MOUNTING INTERFACE - Norglide bushing 1/2" Universal Axle CAN SIZE - Standard (All Lengths), Extra Volume (200, 216, 222, 240)

Introducing the DBAIR [IL], an all-new twin-tube inline shock with superior performance and reliability. The first shock to feature Cane Creek’s LinEair Spring, the DBAIR [IL] is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. When developing the DBAIR [IL], Cane Creek's engineering team brought forth great advancements in design and manufacturing processes, all devised to make the shocks more robust compared to the previous generation. The fully loaded functions of the DBAIR [IL] far outstrips other inline shocks and now offers even greater performance and reliability to unleash the full potential of trail and enduro bikes. DOUBLE BARREL TWIN TUBE TECHNOLOGY Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. CLIMBING SWITCH TECHNOLOGY CS is the most innovative climbing feature available. This proprietary climbing feature (patent-pending) for Double Barrel shocks alters the entire low frequency dynamic response of the shock to specifically address the demands of ascending on a bicycle. LinEair SPRING The DBAIR [IL] is the first shock to feature Cane Creek's LinEair Spring. Requiring a lower force to activate, the LinEair Spring provides the consistent feel of a coil shock from the initial stroke, full support during mid stroke and the added bonus of a progressive air spring curve when deep in the travel. WEIGHT ~397 grams (weight varies by size) DAMPING - Twin-tube independent compression and rebound in two high-speed and four low-speed damping circuits ADJUSTMENTS - 4-way independent adjustment: - High speed compression -Low speed compression - High speed rebound - Low speed rebound - Climb Switch On/off SHAFT MATERIAL - Aluminum 7075 SHAFT DIAMETER - 8mm AIR SPRING - LinEair Air Spring FINISH - Anodized and laser-etched MOUNTING INTERFACE - High performance low friction IGUS bushing 1/2" Universal Axle

For years riders have had to sacrifice carrying the weight of a coil shock in order to get the performance and consistency they desired. The DBcoil [IL] is the first ever twin-tube inline shock that packs in all of the function of a piggyback coil shock in a lighter (*333g difference) and sleeker package. Equipped with a VALT** lightweight spring, Climb Switch technology, 4-way adjustability and unparalleled Double Barrel performance, the DBcoil [IL] dominates aggressive descents with superior small bump compliance, heat dissipation and linear spring action. * (216×63) DBCOIL [IL] with VALT as compared to a DBCoil CS with a standard spring ** A spring is required for this shock DOUBLE BARREL TWIN TUBE TECHNOLOGY Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. CLIMBING SWITCH TECHNOLOGY CS is the most innovative climbing feature available. This proprietary climbing feature (patent-pending) for Double Barrel shocks alters the entire low frequency dynamic response of the shock to specifically address the demands of ascending on a bicycle. WEIGHT ~285 grams (weight varies by size) DAMPING - Twin-tube independent compression and rebound in two high-speed and four low-speed damping circuits ADJUSTMENTS - 4-way independent adjustment: - High speed compression - Low speed compression - High speed rebound - Low speed rebound - Spring preload Climb Switch On/off SHAFT MATERIAL - Induction-hardened 4130 steel SHAFT DIAMETER - 8mm FINISH - Anodized and laser-etched MOUNTING INTERFACE - High performance low friction bushing 1/2" Universal Axle

Suspension provides control and Cane Creek's DBinline Damper has the adjustability you need to tailor rear suspension characteristics to your riding style, bike, and local trails. An extensive tuning range includes high- and low-speed compression and high- and low-speed rebound. Where does the Double Barrel name come from? Cane Creek's Double Barrel technology circulates oil continuously through the valving to achieve highly controllable, independent damping for both compression and rebound strokes so the shock retains its plushness and sensitivity from the top to the bottom of the trail, no matter how long the descent.

- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks