Tubes: All Sizes/Types

- Designed to improve rotational stability by decreasing rotational mass at the valve body - Lightweight aluminum Presta-valve body - Removable valve core - Extenders are available and sold separately

Durable enough to keep you rolling, yet light enough to not feel overly cumbersome in your jersey pocket. - Presta valve

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- Size: 26 x 1.0 – 1.25 - ISO Diameter: 559 / 26" mtn - ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Schrader Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. This tube features a 48mm-long valve stem ideal for deep-section rims.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 40mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. These tubes feature removable valve cores.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Continental Light Tubes are made of a lightweight seamless butyl rubber and are individually tested for top quality. These tubes are nearly 30% lighter than standard tubes to make your bicycle easier to ride. - 42mm valve: 70 grams - 60mm valve: 80 grams - 80mm valve: 90 grams

Challenge's S.C. Seamless Latex Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 19 to 28mm wide, and has a 47.5mm-long valve with a removable core. - 60 grams

The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

- Valve: Presta - Butyl rubber - Wall thickness: 0.9mm

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm